The effect of various inhaled asthma medications on the color stability of paediatric dental restorative materials.

BACKGROUND: The purpose of the study is to analyse the effects of different inhaled asthma medications (IAMs) on the color change of dental restorative materials (DRMs). METHODS: In total, 192 samples were taken from six different DRMs: [Filtek Z550 (nanohybrid composite), Fusio Liquid Dentin (Self-adhering flowable composite), Filtek Ultimate (nanofilled flowable composite), Dyract XP (compomer), Fuji II LC (resin-modified glass ionomer), Fuji IX Fast (self-cured-packable glass ionomer), (n = 32)]. After the initial color values (CIELab) of DRMs were measured by using a spectrophotometer, each sample was exposed to the same IAMs via nebulizer according to the four different inhaled therapies and measurements were repeated on the 7th & 21st days. RESULTS: In all IAM groups, DRM with the least amount of ΔE was nanohybrid composite, while the highest ΔE was found in Fuji II LC. Among all experimental groups, only Fuji II LC which was administered the combined medication, exceeded the clinically unacceptable threshold (ΔE = 3.3) on 7th & 21st days. CONCLUSIONS: Consequently, important factors affecting the susceptibility to color stability are the type of IAMs, the administration time-dosage, and the type of DRMs.

Predictors of Parental Acceptance towards Contemporary Behavior Management Techniques Used in Pediatric Dentistry: A Preliminary Study on Turkish Population.

BACKGROUND: Parents, who make the final decision regarding their child's treatment, play a significant role in their dental care. Parental approval is important for each stage of treatment and may affect the physician's approach to the treatment. Therefore, it is essential for pediatric dentists to comprehend which behavior management techniques (BMTs) are acceptable to parents and to identify the factors that influence their acceptability. METHODS: Parents who were bringing their children for dental treatment answered a survey on the acceptance of twenty contemporary BMTs. The sociodemographic data of the parents and the age, gender, and Frankl behavior rating scale (Frankl) scores of their children were recorded. Parents were asked to indicate their level of acceptance of each BMT. Binary logistic regression analysis was designed to see the predictors of "accepted" and "declined" answers. RESULTS: According to acceptance frequencies, the most accepted technique was communication and communicative guidance. The most declined technique was parental absence. The child's age, gender, Frankl score, parental educational status, and parent type predict the acceptability of some BMTs. CONCLUSION: This study revealed that pediatric dentists must consider parent and child factors when selecting BMTs for children. We believe that this study can provide a basis for determining which factors pediatric dentists should consider when selecting individualized BMTs.

Does the Modality of Dental Treatment Affect the Treatment Prognosis and the Necessity of Re-Treatments?

BACKGROUND: The utilization of evidence-based approaches is crucial to achieving long-term positive outcomes for treatment performed chairside or under general anesthesia. The study aimed to evaluate if treatment modality (at the chairside or under general anesthesia) affects prognosis and the need for re-treatment. METHODS: Oral-hygiene, gingival, and plaque indexes were recorded during the control appointment. The success of all treatments was evaluated according to the scoring of particular evaluation criteria. RESULTS: A total of 1066 dental procedures were performed on 92 children. Plaque index scores were higher for patients treated under general anesthesia. The success rate of restorative procedures was 82.5% under general anesthesia and 80.6% at the chairside. There was no statistically significant difference between the mean number of restorative treatments and the need for re-treatment between general anesthesia or chairside (p = 0.649, p = 0.311). The mean number of unsuccessful endodontic treatments performed under general anesthesia was higher than performed chairside. Only two out of thirty stainless-steel crowns were decemented, all performed under general anesthesia. CONCLUSIONS: The high volume of restoration failure due to secondary caries has highlighted the need for alternative approaches to caries management, especially given the risks associated with repeat general anesthetic.

Evaluation of the Shear Bond Strength of Immediate and Delayed Restorations of Various Calcium Silicate-Based Materials with Fiber-Reinforced Composite Resin Materials.

Due to significant tissue loss in teeth requiring pulp treatments, hermetic restoration of the remaining dental tissues is one of the most crucial factors in determining the treatment's success. The adhesion of composite resins to calcium silicate cements (CSCs) is considered challenging. Consequently, it is crucial to identify the optimal method for obtaining optimal adhesion. The aim of the present study is to evaluate the shear bond strength (SBS) values of immediate and delayed restorations with fiber-reinforced composites on powder-liquid, premixed, and resin-containing flowable CSCs. In the present study, the SBS values obtained after immediate (14 min) and delayed (7 days) restorations of three different CSCs (NeoMTA2, NeoPutty, and TheraCal PT) with three different resin composite materials (EverX FlowTM, EverX PosteriorTM, and Filtek Z550) were compared. The fracture types were evaluated using a stereomicroscope and SEM. TheraCal PT had the highest SBS values for both immediate and delayed restorations, and the comparison with other materials showed a statistically significant difference (p = 0.001). In contrast, there was no statistically significant difference between the SBS values of NeoMTA and NeoPutty (p > 0.05). In both immediate and delayed restorations, there was no statistically significant difference between nanohybrid and fiber-reinforced composites (p > 0.05). The simple use and strong bonding ability of TheraCal PT with composite resins may provide support for the idea that it is suitable for pulpal interventions. Nevertheless, due to the in vitro nature of this study, additional in vitro and clinical studies are required to investigate the material's physical, mechanical, and biological properties for use in clinical applications.

In Vitro Comparison of Surface Roughness, Flexural, and Microtensile Strength of Various Glass-Ionomer-Based Materials and a New Alkasite Restorative Material.

This study aims to evaluate the physical properties of Cention N and various glass-ionomer-based materials in vitro. The groups were obtained as follows: Group 1 (LC-Cent): light-cured Cention N; Group 2 (SC-Cent): self-cured Cention N; Group 3 (COMP): composite (3M Universal Restorative 200); Group 4 (DYRA): compomer (Dyract XP); Group 5 (LINER): Glass Liner; Group 6 (FUJI): FujiII LC Capsule; and Group 7 (NOVA): Nova Glass LC. For the microtensile bond strength (µTBS) test, 21 extracted human molar teeth were used. The enamel of the teeth was removed, and flat dentin surfaces were obtained. Materials were applied up to 3 mm, and sticks were obtained from the teeth. Additionally, specimens were prepared, and their flexural strength and surface roughness (Ra) were evaluated. Herein, data were recorded using SPSS 22.0, and the flexural strength, µTBS, and Ra were statistically analyzed. According to the surface roughness tests, the highest Ra values were observed in Group 6 (FUJI) (0.33 ± 0.1), whereas the lowest Ra values were observed in Group 2 (SC-Cent) (0.17 ± 0.04) (p < 0.05). The flexural strengths of the materials were compared, and the highest value was obtained in Group 2 (SC-Cent) (86.32 ± 15.37), whereas the lowest value was obtained in Group 5 (LINER) (41.75 ± 10.05) (p < 0.05). When the µTBS of materials to teeth was evaluated, the highest µTBS was observed in Group 3 (COMP) (16.50 ± 7.73) and Group 4 (DYRA) (16.36 ± 4.64), whereas the lowest µTBS was found in Group 7 (NOVA) (9.88 ± 1.87) (p < 0.05). According to the µTBS results of materials-to-materials bonding, both Group 2 (SC-Cent) and Group 1 (LC-Cent) made the best bonding with Group 3 (COMP) (p < 0.05). It can be concluded that self-cured Cention N had the highest flexural strength and lowest surface roughness of the seven materials tested. Although the bond strength was statistically lower than conventional composites and compomers, it was similar to resin-modified glass ionomer cements. Additionally, the best material-to-material bonding was found between self-cured Cention N and conventional composites.

Evaluation of the microhardness of different resin-based dental restorative materials treated with gastric acid: Scanning electron microscopy-energy dispersive X-ray spectroscopy analysis.

The aim of this study is to evaluate the microhardness, relative surface roughness, and elemental changes of resin-based dental restorative materials (RDRMs) after gastric acid treatment. Five different RDRMs (Group 1 [Filtek Z550], Group 2 [Beautifil II], Group 3 [Vertise Flow], Group 4 [Dyract XP], Group 5 [Fuji II LC]) were used. Samples were formed by using plexiglass molds of 10 mm diameter and 2 mm thickness. A total of 50 samples (n = 10) for microhardness tests and a total of 15 samples (n = 3) for scanning electron microscopy (SEM)-energy dispersive X-ray spectroscopy (EDX) analysis were prepared. All samples of each group were treated to gastric acid, simultaneously. A Vickers microhardness tester was used to evaluate the microhardness of the upper surfaces of each sample. SEM-EDX system was used for microstructure and elemental composition detection. The SEM-EDX, microhardness and relative surface roughness analysis were made prior to treatment in gastric acid for 14 days and analysis were repeated on the 14th day. As the difference in the microhardness values of RDRMs was compared, the time-dependent variation in all RDRMs was found to be statistically significant. It was observed that a drastic decrease in microhardness values was in Beautifil II, Filtek Z550, Vertise Flow, Fuji II LC, and Dyract XP, respectively. Average decrease rate of microhardness values compared to the initial state can be listed from high to low as Beautifil II (%35.72), Vertise Flow (% 28.88), Fuji II LC (% 21.09), Dyract XP (%17.60), and Filtek Z550 (% 16.58). As a result, in in-vitro conditions gastric acid decreased microhardness while increasing the relative surface roughness of RDRMs.

The effect of various asthma medications on surface roughness of pediatric dental restorative materials: An atomic force microscopy and scanning electron microscopy study.

The aim of the study is to examine and compare the effects of various inhaled asthma medications (IAMs) on the surface roughness of dental restorative materials (DRMs). In total, 192 samples were prepared including 32 samples for the each material group from six different DRMs [Nanohybrid composite (Filtek Z550), Nanofilled flowable composite (Filtek Ultimate), Compomer (Dyract XP), Conventional glass ionomer (Fuji IX Fast), Resin-modified glass ionomer (Fuji II LC), Self-adhering flowable composite (Fusio Liquid Dentin)]. Each group, were divided into four subgroups (n = 8) according to four different IAMs. Surface roughness values (Ra) were obtained by atomic force microscopy (AFM). After the initial roughness of DRMs was analyzed by using AFM and scanning electron microscopy (SEM), each samples were exposed to the same IAMs for 21 days and all analysis were repeated on the 7th and 21st day. Ras increased in all DRMs and higher Ras were recorded through the long-term IAMs administrations. For all IAMs, Fuji II LC had the highest Ra and Filtek Z550 had the lowest Ra. The combined IAM created the highest roughness change on the 7th and 21st day compared to other IAMs. As a result, in in vitro conditions IAMs significantly increased the surface roughness of DRMs.

Does Virtual Reality Affect Children's Dental Anxiety, Pain, And Behaviour? A Randomised, Placebo-Controlled, Cross-Over Trial

ABSTRACT Objective: To evaluate the effect of virtual reality (VR) on dental anxiety, pain, and behaviour at different time points among children undergoing dental treatment under local anaesthesia. Material and Methods: This randomised, two‐armed, within-subject, cross-over, placebo-controlled trial included 76 children. Eligible participants were treated in two dental visits using the following methods: with protective glasses only, without distraction (attention placebo-controlled - APC); and with the treatment condition (i.e., VR). Primary outcomes were dental anxiety and pain; secondary outcome was dental visit behaviour. Heart rate scores were recorded as an objective measure to evaluate dental anxiety and pain. Subjective measurements for each variable were also performed. Results: Significant reduction in dental pain and anxiety was observed in the VR group, according to the heart rate scores; however, no statistical differences were observed according to the self-reported measures. Decreased dental anxiety and pain were associated with the first visit sequence with VR. Dental pain and anxiety scores were lower during local anaesthesia in the VR group than in the APC group. Conclusion: Virtual reality significantly reduced pain and anxiety during local anaesthesia in children undergoing dental treatment; therefore, it may be recommended during dental treatment in school-age children.

Primary Tooth Extraction Pattern Among Turkish Children with Severe Early Childhood Caries Treated Under General Anesthesia

Abstract Objective: To determine the frequency and distribution of extracted primary teeth due to severe Early Childhood Caries (ECC) in young pediatric patients treated under general anesthesia. Material and Methods: This study employed a retrospective design and consisted of a total of 1644 children (1011 boys, 633 girls) children aged 3 to 5 who had been diagnosed with several ECC and treated under general anesthesia in a dental faculty between 2013-2019. The data was obtained from the medical and dental forms obtained from the faculty database. The patients were divided according to age groups and sex. A total of 2605 teeth were classified according to the sex, tooth number, and age groups. Results: Of the subjects, 14% (n = 245) were 3 years old, 31% (n = 505) were 4 years old, 55% (n = 894) were 5 years old. The mean ± SD age of subjects was 4.2 ± 0.8 yr. While the most extracted teeth were found to be maxillary primary central incisors and molar teeth, the less were found to be mandibular primary canines. While there was a statistically significant difference between canines and incisors with molars (p<0.05), no difference existed between incisors and molars. There was a statistically significance difference among all age groups (p<0.05). While 3 years old group had the less number of extracted teeth, 5 years old group had the most number of extracted teeth. Conclusion: Severe ECC causes higher tooth extraction in patients treated under general anesthesia. Effective personal and community programs should be initiated to prevent ECC and mitigate its potential disruptive impacts in children's oral health.